TBT-0709A
TBTSCIETECH
Availability: | |
---|---|
This machine is used to do the Marshall stability test for bituminous materials.
This machine is used to do the Marshall stability test for bituminous materials.
1. This instrument has functions of parameters setting, measurement calibration, automatic test control, automatic data collection and timer. The control unit will collect stability and flow value for sample and judge the peak value automatically.
2. LCD touch screen shows stability, flow value, curves, result and time. The test effect is intuitive .
3. 100 groups of test data and test time can be stored in the instrument and callout whenever needed. All procedures will be controlled automatically.
4. RS232 communication port. Realize the communication with upper computer. The data process, store, print and display can be controlled by a PC. Also the test procedures can be controlled by a PC.
5. This instrument also has functions for manual lifting, lowering and stopping. Convenient to use.
Note:Ф100mm sample clamp is in standard accessory list for this instrument. Users can also select clamps as blow:
1. Sample clamp: Ф150mm, one piece
2. Sample clamp: Ф100mm and Ф150mm, one for each.
1. This instrument has functions of parameters setting, measurement calibration, automatic test control, automatic data collection and timer. The control unit will collect stability and flow value for sample and judge the peak value automatically.
2. LCD touch screen shows stability, flow value, curves, result and time. The test effect is intuitive .
3. 100 groups of test data and test time can be stored in the instrument and callout whenever needed. All procedures will be controlled automatically.
4. RS232 communication port. Realize the communication with upper computer. The data process, store, print and display can be controlled by a PC. Also the test procedures can be controlled by a PC.
5. This instrument also has functions for manual lifting, lowering and stopping. Convenient to use.
Note:Ф100mm sample clamp is in standard accessory list for this instrument. Users can also select clamps as blow:
1. Sample clamp: Ф150mm, one piece
2. Sample clamp: Ф100mm and Ф150mm, one for each.
1. Maximum load | 50kN |
2. Measuring range | ≤40kN |
3. Measuring bias | ≤±0.1kN |
4. Overload protection | Automatically protect when load is over 39kN |
5. vertical deformation(flow value) | Range 0~20mm, bias ≤±0.05mm |
6. Lifting rate for pressure machine | (50±5)mm/min |
7. Communication port | RS232 |
8. Power supply | AC220V±10%,50Hz |
9. Ambient temperature | 0℃~60℃ |
10.Dimension | 600mm×380mm×840mm |
11.Motor power | 550W |
12.Net weight | 98kg |
1. Maximum load | 50kN |
2. Measuring range | ≤40kN |
3. Measuring bias | ≤±0.1kN |
4. Overload protection | Automatically protect when load is over 39kN |
5. vertical deformation(flow value) | Range 0~20mm, bias ≤±0.05mm |
6. Lifting rate for pressure machine | (50±5)mm/min |
7. Communication port | RS232 |
8. Power supply | AC220V±10%,50Hz |
9. Ambient temperature | 0℃~60℃ |
10.Dimension | 600mm×380mm×840mm |
11.Motor power | 550W |
12.Net weight | 98kg |
No. | Name | Unit | Qty |
1 | Marshall Stability Tester | Set | 1 |
2 | Pressure sensor (Installed in machine) | Set | 1 |
3 | Displacement sensor(Installed in machine) | Set | 1 |
4 | Power line | Piece | 1 |
5 | PC communication line | Piece | 1 |
6 | Hand crank | Piece | 1 |
7 | Printer (including regulated power supply) | Set | 1 |
8 | Operation manual | Piece | 1 |
9 | Quality certificate | Piece | 1 |
10 | Repair guarantee | Piece | 1 |
No. | Name | Unit | Qty |
1 | Marshall Stability Tester | Set | 1 |
2 | Pressure sensor (Installed in machine) | Set | 1 |
3 | Displacement sensor(Installed in machine) | Set | 1 |
4 | Power line | Piece | 1 |
5 | PC communication line | Piece | 1 |
6 | Hand crank | Piece | 1 |
7 | Printer (including regulated power supply) | Set | 1 |
8 | Operation manual | Piece | 1 |
9 | Quality certificate | Piece | 1 |
10 | Repair guarantee | Piece | 1 |
content is empty!