TBT-XY150
TBTSCIETECH
Availability: | |
---|---|
This instrument is designed and made as per industrial standard JT/T 724-2008 Gyrator Compactor and T 0736-2011 in JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering.
This instrument is designed and made as per industrial standard JT/T 724-2008 Gyrator Compactor and T 0736-2011 in JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering.
1. Single chip microcomputer technology. LCD display. Man-machine dialog interface. All test procedures can be controlled automatically.
2. All rotating components are covered. Safe to use.
3. Two compaction mode:automatic and manual. The test procedures can be finished after setting parameters under automatic compaction mode. Each procedure or status can be controlled under manual compaction mode.
4. Two selectable sample: 100mm or 150mm. Rotation angle can be switched between 0.5°and 2.0°. Angle adjusting accuracy is 0.01°.
5. Special mould ejector. Convenient to use.
1. Single chip microcomputer technology. LCD display. Man-machine dialog interface. All test procedures can be controlled automatically.
2. All rotating components are covered. Safe to use.
3. Two compaction mode:automatic and manual. The test procedures can be finished after setting parameters under automatic compaction mode. Each procedure or status can be controlled under manual compaction mode.
4. Two selectable sample: 100mm or 150mm. Rotation angle can be switched between 0.5°and 2.0°. Angle adjusting accuracy is 0.01°.
5. Special mould ejector. Convenient to use.
1. Pressure range | (100~1000)kPa, continuously adjustable |
2. Rotation times | Foreward(as per setted compaction angle):(0~1000)times Reversed(compaction angle is 0°):(0~500)times |
3.Range of gyrate compaction angle | 0.5°~2.0°, increase as every 0.01° (Calibrated at 1.16°±0.02° internal angle when leaving factory) |
4.Accuracy of gyrate compaction angle | <0.01° |
5.Movement range for compactor | (0~250)mm |
6.Movement accuracy for compactor | <0.01mm |
7. Rotation speed | (30±0.5)RPM |
8. Rated speed of motor | 1800RPM |
9. Overall Height | 1900mm |
10. Dimension | Main unit (Push rod is included):940mm×890×mm×2140m
Mould ejector (Handle is not included):355.6mm×304.8mm×800mm |
11. Net weight | 370kg |
12. Gross weight | 410kg |
1. Pressure range | (100~1000)kPa, continuously adjustable |
2. Rotation times | Foreward(as per setted compaction angle):(0~1000)times Reversed(compaction angle is 0°):(0~500)times |
3.Range of gyrate compaction angle | 0.5°~2.0°, increase as every 0.01° (Calibrated at 1.16°±0.02° internal angle when leaving factory) |
4.Accuracy of gyrate compaction angle | <0.01° |
5.Movement range for compactor | (0~250)mm |
6.Movement accuracy for compactor | <0.01mm |
7. Rotation speed | (30±0.5)RPM |
8. Rated speed of motor | 1800RPM |
9. Overall Height | 1900mm |
10. Dimension | Main unit (Push rod is included):940mm×890×mm×2140m
Mould ejector (Handle is not included):355.6mm×304.8mm×800mm |
11. Net weight | 370kg |
12. Gross weight | 410kg |
No | Item | Unit | Qty |
1 | Stripper | Piece | 1 |
2 | φ150㎜ test module (with the bottom die and bottom bracket) | Set | 1 |
3 | Height block | Piece | 1 |
4 | Height pad | Piece | 1 |
5 | Three-phase four-wire power line | Piece | 1 |
No | Item | Unit | Qty |
1 | Stripper | Piece | 1 |
2 | φ150㎜ test module (with the bottom die and bottom bracket) | Set | 1 |
3 | Height block | Piece | 1 |
4 | Height pad | Piece | 1 |
5 | Three-phase four-wire power line | Piece | 1 |
content is empty!