1. It adopts technology of single chip microcomputer and LCD screen. English man-machine interface.The heating device is continuously adjustable.Easy to set parameters.
2. The LCD screen has prompt menu, prompt type input for operation interface. It shows set parameters and real-time display sample temperature and other parameters. Press the record key when flash point appearing. The screen will display and save flash point value.
3. It is newly design and small structure. Stainless steel working table make it elegant and beautiful. The operator can do determination as long as connecting with coal gas or other civil gas. Easy to use and results are exact.
4. It is equipped with wind-shelter and flame extinguishing cover which are accord with requirements of test.
Accurate heating rate.The instrument can do test automatically.
5. Operator only need to observe the flash point appearing. The cost performance is high.
Power supply: | 220VAC 50HZ |
Heating device | Quartz tube furnace heating, no naked fire, explosion prevented. The power is adjustable from 0W to 600W. |
Test flame applicator | It applies the test flame automatically. |
Thermometer: | (-6～400)℃. It is the same as thermometer ASTM 11C. |
Igniting device | (1) Ignition source: coal gas(or civil gas) (2) Flame diameter is 3.2mm～4.8mm |
Display | LCD display |
Relative humidity | ≤85% |
Maximum power consumption | 650W |
Dimension | 350mm×290mm×350mm (thermometer is not included) |
No. | Name | Unit | Qty | Remark |
1 | Main unit | Set | 1 | |
2 | Cleveland oil cup | Piece | 1 | We can provide more if you required. |
3 | Ignition device | Set | 1 | |
4 | Thermometer | Piece | 1 | -6℃～400 ℃, scale division is 2 ℃ |
5 | Thermometer holder | Set | 1 | |
6 | Fuse 5 A (Φ5×20) | Piece | 2 | |
7 | Latex tube Φ6 | Meter | 1.5 | Could not be used as coal gas tube |
8 | Joint for coal gas tube | Piece | 1 | Connect coal gas tube and latex tube |
9 | Extinguishing cover | Piece | 1 |
content is empty!