This testing machine is hydraulic driven & PC display, used for the tensile test, compression test and bending test of metal, also for non-metal of compression test, such as concrete and stone. If the proper jigs are provided, it can be used for various tests in the laboratories of mills, factories, colleges and research units concerned.
The testing machine is mainly designed for the tensile test, compression test and bending test of metal, also for non-metal
of compression test, such as concrete and stone. If the proper jigs are provided, it can be used for various tests in the laboratories of mills, factories, colleges and research units concerned.
It is featured with hydraulic loading, electronic force measurement, the load, the test process with curve can
be displayed on the computer screen, and the data can be saved and printed out. It is overload protection. The oil cylinder is fitted on the bottom of the main frame, which is suitable for the compression test and all the annex will be provided for the technological tests of the metal.
1. Hydraulic system are equipped with high quality hydraulic components, to ensure machine long-term & stable operation.
2. Machine equipped with protection for overload and limit, safe and reliable.
3. Between upper and lower platen is the tensile space; Between lower platen and platform is the compression space.
4. Testing curve and data can be displayed directly on computer.
4%-100%F.S.(full range, without gear）
Width between two column
Max tensile space（mm)
Max compression space(mm)
Bending test Distance between two points (mm)
Round specimen clamp diameter(mm)
Flat specimen clamp thickness (mm)
Pistons rise fastest speed(mm/min）
Beam rising speed (mm/min)
Displacement reading relative error
Deformation reading relative error
Motor capacity (KW)
Main unit dimension (mm)
Oil source cabinet dimension (mm)
Main unit net weight (kg)
Oil source cabinet net weight（kg)
1. working temperature: 10~35C
2. Relative humidity: less than 80%
3. Power supply: 220VAC or 380VAC
4. Machine should be placed in a clean place, away from vibration, corrosion and magnetic field.
Standard Packing list
A-1. Main Unit
A-2. Control Cabinet
A-3. Computer, printer
A-4. Operation manual, certificate of calibration
A-5. Accessories pack
A-5 Accessories pack
a. Jaw for round specimen D20~40/D40~60mm (4pcs each size)
b. Jaw for plate specimen D-~40mm(4pcs)
c. Compression plate D150mm *1pc
d. Ball-shaped plate D150mm *1set
e. Bending test device (without bending punch)
f. Anchor bolt and nut M24 x 300mm*4sets
g. Oil tube (6AI-2.8m / 6AI-3.3m, 2pcs each size)
h. Hex wrench (4mm / 5mm*1pc each size)
i. Molybdenum disulfide lithium grease
k. D50 cold bending punch (or pressure head)